Energy Storage
Fully automatic IPX4/IPX5/IPX6 waterproof testing assembly line
I. Product Introduction
This waterproof testing equipment is specifically designed for conducting IPX4, IPX5, and IPX6 waterproof tests on various products, including industrial and commercial cabinets, energy storage-related products, and more. It is divided into an incoming material area, a rain spraying area, a drying area, and an outgoing material area. The spraying area can spray water on the front, back, left, right, and top surfaces of the product. After the spraying test, the product is moved by the assembly line to the drying area for air drying. The equipment mainly consists of a water pump system, a water return system, a spraying system, an electronic control system, and an air drying system.
II. Compliance with standards
GB4208-2017/IEC60529:2013 Degrees of Protection Provided by Enclosures (IP Code) for waterproof tests of IPX4, IPX5, and IPX6; ISO20653:2006 Road Vehicles - Degrees of Protection Provided (IP Code) - Protection of Electrical Equipment against Foreign Objects, Water, and Contact for waterproof tests of IPX4, IPX5, and IPX6; GB/T2423.38-2005/IEC600682-18:2000 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test R: Water Testing Methods and Guidelines for dripping, flushing, and immersion tests.
CONTENT
Technical parameters of fully automated IPX4/IPX5/IPX6 waterproof testing assembly line
| Applicable Products | The maximum size is 2000 × 2500 × 3000mm, with a load-bearing capacity of ≤ 2.5 tons, ≤ 5 tons, and ≤ 10 tons |
| spray range | Fully automatic coverage spray on the front, rear, left, right, and upper surfaces |
| Test level | Supports multiple levels of waterproof testing such as IPX4, IPX5, IPX6, etc |
| Number of nozzles | 16 IPX4 nozzles, 16 IPX5 nozzles, 8 IPX6 nozzles |
| Spray hole inner diameter | IPX4 showerhead with a diameter of 102mm and 121 0.5mm holes ; 6.3mm (IPX5 rating) ; 12.5mm (IPX6 rating) |
| Spray flow rate | 10 ± 5 % ( L / min ) ( IPX4 rating ), 12.5 ± 5 % ( L / min ) ( IPX5 rating ), 100 ± 5 % ( L / min ) ( IPX6 rating ) |
| Spray pressure | IPX4 showerhead adjustable from 80 ~ 150kPa, IPX5 30 ~ 100kPa ; IPX6 80 ~ 150kPa |
| Nozzle swing | Swing up and down ± 15 °, adjustable frequency of 15-30 times / minute |
| Spray efficiency | About 5-10 minutes per unit, drying time about 3-5 minutes ( adjustable according to product specifications ) |
| Drying system | Three sided high-pressure air knife, angle can be manually adjusted, top surface can be moved up and down |
| Water circulation system | Ensure the recycling of water sources |
| power supply parameters | Power supply 380V, 50Hz, power approximately 65kW |
| Equipment Protection | The overall protection level of the machine is IP56 + , reaching C4 anti-corrosion level |
