In fact, it is a rain test applied to automobiles, automotive parts, etc. to verify whether the protective and waterproof functions of their shells comply with IP international standards.

A car rain test room, also known as a rain test room, rain test laboratory, etc., is a larger room where products are tested. So, is there a standard for car rain test rooms? Today, I will briefly share some information about the device with you as follows:

The car rain test room is designed and constructed based on factors such as the appearance, size, usage site, and waterproof level of the car. of course! When designing a car rain test room, it is necessary to conduct rain tests in all directions, and the intensity and angle of water spraying should be suitable and comply with national standards.

Equipment characteristics of car rain test room:

1. The indoor body adopts a combination of assembled panels, both inside and outside are made of color steel plates as the rain chamber body, with a thickness of 50mm, ensuring that the external materials are waterproof. The floor of the indoor body adopts cement floor, and the floor drain grating plate adopts anti rust and anti-corrosion materials;

2. Lighting for car rain test room: Moisture proof and waterproof lighting fixtures are installed on the inner side of the rain test room, with two lamps, AC220 50HZ, and the lamps are covered with moisture-proof glass;

3. Observation window for car rain test room: A 1000 * 2000mm observation window is installed on one side of the rain test room (the size and quantity of observation windows can be customized according to needs);

4. Drainage: The drainage channels are located in the middle of the room and discharge to the sewage tank.